SG40 Gyro Stabilizer

$25.00

50 - 60'

Smartgyro SG40 is the gyro stabilizer of choice for boats from 50-60 ft. Ideal for both new builds and refit installations, the stabilizer can be fully serviced on-board the vessel without the need to lift out for maintenance, ensuring significant time and cost savings.

50 - 60'

Smartgyro SG40 is the gyro stabilizer of choice for boats from 50-60 ft. Ideal for both new builds and refit installations, the stabilizer can be fully serviced on-board the vessel without the need to lift out for maintenance, ensuring significant time and cost savings.

 

SG40 SPECIFICATIONS

  • Target Boat:
    50 – 60’ or up to 40 tons

  • Maximum rated speed:
    7.500 RPM

  • Angular momentum:
    9.100 Nms at max. rated speed

  • Max. Anti-rolling torque:
    19.000 Nm at max. rated speed

  • Input voltage (AC):
    220V nominal, 50/60 Hz, single phase

  • Control DC power input:
    24 Vdc

  • Envelope dimensions:
    0.86 x 0.93 x 0.72 m [34.0 x 36.5 x 28.4 in]

  • Weight:
    650 kg [1430 lbs]

Download Data Sheet
 
 

THE FUTURE OF MARINE STABILIZATION

  • MODULAR DESIGN
    The Smartgyro unit can be serviced, maintained, and assembled directly inside the boat.

  • LIQUID COOLING
    The liquid cooling system dissipates heat generated by the motor and spinning bearings while also cooling the inverter and hydraulic manifold.

  • VACUUM ENCLOSURE
    The sealed vacuum flywheel enclosure minimizes air drag to increase performance and reduce heat and power consumption.

  • CONTROL ELECTRONICS
    The gyro control module uses motion sensors and an Inertial Measuring Unit (IMU) to monitor and process real-time boat behavior data.

  • BRAKING SYSTEM
    The pressurized, closed loop braking system dynamically controls the gyro using hydraulic cylinders and proportional valve.

  • DRIVING PERFORMANCE
    The Smartgyro automatically locks the gyro’s counteracting forces during high-speed turns to make for smoother sailing.