SG20 Gyro Stabilizer

$25.00

45 - 55'

The Smartgyro SG20 is the gyro stabilizer of choice for boats from 45-55 ft. Ideal for both new builds and refit installations, the stabilizer can be fully serviced on-board the vessel without the need to lift out for maintenance, ensuring significant time and cost savings.

45 - 55'

The Smartgyro SG20 is the gyro stabilizer of choice for boats from 45-55 ft. Ideal for both new builds and refit installations, the stabilizer can be fully serviced on-board the vessel without the need to lift out for maintenance, ensuring significant time and cost savings.

 

SG20 SPECIFICATIONS

  • Target Boat:
    45 – 55ft or up to 25 tonnes

  • Maximum Rated Speed:
    9.500 RPM

  • Angular Momentum:
    5,900 Nms at max. rated speed

  • Anti-Rolling Torque:
    15,500 Nm at max. rated speed

  • Input Voltage (AC):
    115V nominal, 50/60 Hz, single phase
    220V nominal, 50/60 Hz, single phase

  • Input Voltage (DC):
    12 Vdc

  • Envelope Dimensions:
    0.76 x 0.77 x 0.65 m [29.9 x 30.3 x 25.6 in]

  • Weight:
    495 kg [1091 lbs]

Download Data Sheet
 
 

THE FUTURE OF MARINE STABILIZATION

  • MODULAR DESIGN
    The Smartgyro unit can be serviced, maintained, and assembled directly inside the boat.

  • LIQUID COOLING
    The liquid cooling system dissipates heat generated by the motor and spinning bearings while also cooling the inverter and hydraulic manifold.

  • VACUUM ENCLOSURE
    The sealed vacuum flywheel enclosure minimizes air drag to increase performance and reduce heat and power consumption.

  • CONTROL ELECTRONICS
    The gyro control module uses motion sensors and an Inertial Measuring Unit (IMU) to monitor and process real-time boat behavior data.

  • BRAKING SYSTEM
    The pressurized, closed loop braking system dynamically controls the gyro using hydraulic cylinders and proportional valve.

  • DRIVING PERFORMANCE
    The Smartgyro automatically locks the gyro’s counteracting forces during high-speed turns to make for smoother sailing.